I have a Samsung Series 5 530U3C-A01 model. My system says I currently have 4GB RAM. I want to add more to make it faster, but can't figure out:
- What's the max RAM it can run, and max speed
- How many slots does it have - Only 1, or perhaps 2 (And then I can buy an additional cheaper 4GB rather than a replacement 8GB)
I found these links, not sure they absolutely apply to my specific model (As I have a different country code in the end):
- 4 GB on board RAM and 2 GB (DDR3) in slot.
What does on board mean?
It also said max is 12GB and speed is 1600 MHz.
While this one says up to 8GB, and 1333 MHz.
EDIT:
I ran the scan, these are the results.
still can't figure everything out:
It doesn't say anything about speed.
It says Max memory is 12GB?
And shows graphic of one slot. does it mean I only have one slot and it is already occupied with 4GB?
I also contacted the manufacturer and was told:
Original memory : 4GB (on-board memory, irremovable )
Available number of RAM slot space: 1
Maximum Capacity of RAM slot: 8GB
RAM type: DDR3 (1333MHz/1600MHz)
So, what is the bottom line, how much RAM should I buy, and in what speed? should I buy "low-voltage"?
Answer
Your laptop has 4Gb integrated memory (called 'on board' on notebookcheck and 'internal memory' on the other site), that means it's soldered on to the motherboard and can't be replaced.
On top of that you have one free slot which supports 1333MHz or 1600MHz SoDIMM up to 8GB. Something like a Kingston KVR16LS11/8 should work fine and will bring you up to 12GB RAM.
Most recent RAM chips are perfectly capable of running on 1.35V or 1.5V ( which is JDEC standard). For instance the KVR16LS11/8 I mentioned works fine with both voltages (see here). It's just a matter of what your memory controller supports and which setting you chose (or is automatically selected) in the BIOS/UEFI. Most likely the Crucial you found can also run on both voltages, Crucial calls this 'dual voltage' (see here).
No comments:
Post a Comment