raid - HP Array P410, HDD changed, but still predict to fail soon

On HP Proliant DL G6, one disk in RAID 1 on P410 array broken. It was HP EG0300FBDBR. I changed it on compatible HP model - HP EG0300FAWHV. (both 300 Gb, 10K)

But HP Array Configuration Utility still show me - that new HP EG0300FAWHV - 300 GB 2-Port SAS Drive at Port 1I : Box 1 : Bay 0 is predicted to fail soon.

New disk in server blinking green - is like "The drive is rebuilding, erasing, or it is part of an array that is undergoing capacity expansion or stripe migration."

But two days gone and status didn't change.

In RIS Event Log, last info:

*> Event 123 2016-02-08 11:56:54 Hot Plug Physical Drive Change Removed.

Physical drive number: 0x09. Configured drive flag: 1. Spare drive
flag: 0. Big drive: 0x00000009. Enclosure Box: 00. Bay: 00 Event 124
2016-02-08 12:16:57 Hot Plug Physical Drive Change Inserted. Physical
drive number: 0x09. Configured drive flag: 1. Spare drive flag: 0. Big
drive: 0x00000009. Enclosure Box: 00. Bay: 00 Event 125 2016-02-08

12:16:57 Logical Drive Status State change. State change, logical
drive 0x0000. Previous logical drive state (0x03): Logical drive is
degraded. New logical drive state (0x04): Logical drive is ready for
recovery operation. Spare status (0x00): No spare configured Event
126 2016-02-08 12:16:57 Logical Drive Status State change. State
change, logical drive 0x0000. Previous logical drive state (0x04):
Logical drive is ready for recovery operation. New logical drive state
(0x05): Logical drive is currently recovering. Spare status (0x00): No
spare configured Event 127 2016-02-08 12:51:51 Logical Drive Status
State change. State change, logical drive 0x0000. Previous logical

drive state (0x05): Logical drive is currently recovering. New logical
drive state (0x00): Logical drive OK. Spare status (0x00): No spare
configured Event 128 2016-02-09 03:23:22 Logical Drive Surface
Analysis Surface Analysis pass information. Block count: 00000000.
Drive No: 00. Starting Address: 00000848:00000000.*

I attached ADU report and screen.

Is it mean that new disk still recovering? But why its status as "predict to fail" and why so long for recovering? Why HP utility didn't mark it as rebuilding?

Report ADU: https://www.dropbox.com/s/70ucdsiafzdwvfr/ADUReport.zip?dl=0