I have problems with burned CD-RW Audio CDs in K3B. I don't know exactly what's wrong. When I burn mp3s as an Audio CD with K3B, the burning process seems to be ok. But when I want to play this burned CD in my PC's CD ROM, the first seconds are snatchy and it seems that it doesn't begin to play at the 1st song but anywhere else. When I want to play this CD in my car radio, the CD doesn't work at all. My car radio cannot read any songs.
Earlier as I didn't use RW CDs but CD R, I didn't have any problems. Maybe the RWs CDs are the reason? I also tried to burn to a different CD RW - same effect. I also tried to burn at different speeds. Once 10x, once "auto" - same effect.
That's the output of the burning process. Maybe it could help:
Devices
HL-DT-ST DVDRAM GH22NS50 TN02 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
HL-DT-ST DVDROM DH16NS30 1.00 (/dev/sr0, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
System
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version: 4.6.2
Kernel: 2.6.32-24-generic
Used versions
cdrecord: 1.1.10
cdrecord
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 900
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22NS50 '
Revision : 'TN02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15928 kB/s 90x CD 11x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 1764 KB/s
pregap1: -1
Track 01: audio 60 MB (05:57.08) no preemp swab copy
Track 02: audio 81 MB (08:06.30) no preemp swab copy
Track 03: audio 56 MB (05:33.74) no preemp swab copy
... [has been shortened by me due to character restrictions of Superuser] ...
Track 09: 34 of 34 MB written (fifo 100%) [buf 97%] 10.2x.
Track 09: Total bytes read/written: 36016176/36016176 (15313 sectors).
Writing time: 279.496s
Average write speed 10.1x.
Min drive buffer fill was 93%
Fixating...
Fixating time: 10.362s
/usr/bin/wodim: fifo had 7275 puts and 7275 gets.
/usr/bin/wodim: fifo was 0 times empty and 7063 times full, min fill was 98%.
cdrecord command:
/usr/bin/wodim -v gracetime=2 dev=/dev/sr1 speed=10 -sao driveropts=burnfree textfile=/tmp/qt_temp.MJ2603 -useinfo -audio /tmp/kde-markus/k3b_audio_0_01.inf /tmp/kde-markus/k3b_audio_0_02.inf /tmp/kde-markus/k3b_audio_0_03.inf /tmp/kde-markus/k3b_audio_0_04.inf /tmp/kde-markus/k3b_audio_0_05.inf /tmp/kde-markus/k3b_audio_0_06.inf /tmp/kde-markus/k3b_audio_0_07.inf /tmp/kde-markus/k3b_audio_0_08.inf /tmp/kde-markus/k3b_audio_0_09.inf
Any ideas what's the matter?
[UPDATE]
I tried it with Brasero, same effect. But Brasero gives me a warning which describes that CD RW Audio CDs will not work with older CD players. Maybe this explains it.
But that doesn't explain why my CD Rom (half a year old) has minor problems too (snatchy at the beginning due to playing difficulties).
Answer
Burning to CD R (with 4x speed) seems to work. It even works in my car radio. Obviously burning audio data to CD RW is no good idea. A colleage of mine told me the same. So problem is solved.
No comments:
Post a Comment