For people who are setting out to build a computer for the first time, there's a lot of information on this site about how to choose an appropriate set of components. But after searching for a while, I couldn't find that much about actually assembling the components once you've got them.
Having gone through the process myself once, I know that it's not that complicated, but still: someone who's new to building a computer is confronted with the task of piecing together a half-dozen instruction manuals into one coherent procedure, and carrying that out while handling (seemingly) delicate electronics without even knowing how easy or hard it is to break something in the process. Basically, it can be a little intimidating. So with that in mind:
What does someone need to know before setting out to assemble a computer from already-purchased parts?
As I mentioned, I couldn't find any comprehensive guide on the site, but there are a few questions that touch on various aspects of it, which I've listed below as examples of the sort of information I might be looking for. I'm basically trying to have one reference - whether an answer here, or an external site, or both - where I can point new computer builders to get all the important tips and "gotchas" to watch out for, in one place.
Tools & Accessories
Procedures
Testing & Troubleshooting
Software (well, maybe not)
A couple of these come close to being duplicates, but I don't think any of them is the all-inclusive reference I'm looking for.
Answer
Assuming you have all of the appropriate components and have taken the appropriate precautions to avoid static discharge, I think it is very important to install the CPU/heatsink and memory on the motherboard PRIOR to mounting the motherboard in the case. This gives you some freedom to operate, particularly on heatsinks which can be sort of a pain when installing. You can also use this opportunity to closely examine your motherboard and see where your auxiliary connectors for the case's power buttons/activity LEDs are going to go.
Speaking of heatsinks, make sure you watch a Youtube video for your particular model to make sure you're doing it correctly. The tabs can easily break off, be obstructed by a metal support frame under your motherboard, and whole bunch of other potential issues that could arise.
Once those are assembled, the rest is pretty easy/fun. Mount the motherboard, connect to the case's buttons and LEDs, then any PCI components, then get your SATA devices hooked up, and lastly, get your power supply in there and everything connected. I save the power supply for last because it can be a mess of cables and generally obstructive.
Once everything is done, grab the motherboard manual in case you get some boot tones and need a reference (usually memory that isn't seated correctly), boot up and enjoy a Windows 7 or Linux install sequence!
For drivers, I try to load as much on to a USB drive as possible, and I give them meaningful names (ATI Video Driver.exe instead of A1234907598.exe), and make sure I have ethernet/network drivers on there if needed. That way if a driver isn't working or isn't supported, I can hop on the net and download whatever I need.
No comments:
Post a Comment