raid - HP Smart Array P400 controller reports physical drives incorrectly

I've been researching on this the majority of the day, when I had time to blow.

But now it's just becoming a headache, when I ask the HP P400 for detailed Information on the drives connected to the backplane it gives them all the same drive number, and model.
I believe it is related to the problem in http://www.motherboardpoint.com/hp-p400-raid-controller-reporting-p-disks-incorrectly-t232845.html but as far as I know this is the official HP Backplane, It's a HP SE 1102 server, all original.

  Logical Drive: 1
     Size: 1.8 TB

     Fault Tolerance: RAID 1+0
     Heads: 255
     Sectors Per Track: 63
     Cylinders: 65535
     Strip Size: 64 KB
     Full Stripe Size: 128 KB
     Status: OK
     Caching:  Enabled
     Unique Identifier: 600508B1001046395656364131340005
     Disk Name: /dev/cciss/c0d0

     Mount Points: /boot 200 MB, / 19.5 GB, /vz 1.8 TB
     OS Status: LOCKED
     Logical Drive Label: A03F08CAP61620F9VV6A144897
     Mirror Group 0:
        physicaldrive 0:0 (box 0:bay 0, SATA, 1 TB, OK)
        physicaldrive 0:0 (box 0:bay 0, SATA, 1 TB, OK)
     Mirror Group 1:
        physicaldrive 0:0 (box 0:bay 0, SATA, 1 TB, OK)
        physicaldrive 0:0 (box 0:bay 0, SATA, 1 TB, OK)
     Drive Type: Data

Array: A
Interface Type: SATA
Unused Space: 0 MB
Status: OK
Array Type: Data

  physicaldrive 0:0
     Box: 0

     Bay: 0
     Status: OK
     Drive Type: Data Drive
     Interface Type: SATA
     Size: 1 TB
     Firmware Revision: 1AJ10001
     Serial Number: 
     Model: ATA     SAMSUNG HE103SJ
     SATA NCQ Capable: True
     SATA NCQ Enabled: True

     PHY Count: 1
     PHY Transfer Rate: 1.5Gbps

  physicaldrive 0:0
     Box: 0
     Bay: 0
     Status: OK
     Drive Type: Data Drive
     Interface Type: SATA
     Size: 1 TB

     Firmware Revision: 1AJ10001
     Serial Number: 
     Model: ATA     SAMSUNG HE103SJ
     SATA NCQ Capable: True
     SATA NCQ Enabled: True
     PHY Count: 1
     PHY Transfer Rate: 1.5Gbps

  physicaldrive 0:0
     Box: 0

     Bay: 0
     Status: OK
     Drive Type: Data Drive
     Interface Type: SATA
     Size: 1 TB
     Firmware Revision: 1AJ10001
     Serial Number: 
     Model: ATA     SAMSUNG HE103SJ
     SATA NCQ Capable: True
     SATA NCQ Enabled: True

     PHY Count: 1
     PHY Transfer Rate: 1.5Gbps

  physicaldrive 0:0
     Box: 0
     Bay: 0
     Status: OK
     Drive Type: Data Drive
     Interface Type: SATA
     Size: 1 TB

     Firmware Revision: 1AJ10001
     Serial Number: 
     Model: ATA     SAMSUNG HE103SJ
     SATA NCQ Capable: True
     SATA NCQ Enabled: True
     PHY Count: 1
     PHY Transfer Rate: 1.5Gbps

HE103SJ does not represent every drive in the server, there is seagate constellations, and a WD RE4. (Weird combination, huh, don't ask why :P).

Does anyone have any idea what's going on here, and what solutions do I have if a drive fails, I cannot just delete 0:0 since I assume it'll delete all drives with the id "0:0".

Thanks!